Lunos e²60

The new LUNOS e²60: Ready for the demand of the future

The new e²60 is convincing in terms of volume flow and pressure stability for the same size. It is the first device of its type to achieve pressure stability class S1 according to EN 13141-8, making it suitable for use in areas with high wind speeds, such as on the coast or at high altitudes.

Buy Now


Thanks to its very low power consumption and intelligent motor control, the e²60 is extremely energy efficient and easily achieves energy efficiency class A+.

The fact that the e²60 achieves the high heat provision level of 88 % is largely due to the newly developed and patented air diffuser, which ensures a particularly even flow through the heat exchanger.


The e²60 enables an even volume flow, which can be infinitely adjusted up to 60 m³/h. The e²60 can be used as a control unit for a wide range of applications. Responsible for the high thermal efficiency of the unit is, among other things, the patented flow regulator, which ensures a constant air flow through the heat exchanger.

The e²60 is pressure-optimised and thus ensures a constant volume flow even in areas with very high back pressures, such as on the coast or at high altitudes.

An optional, intelligent control system ensures that the occurring back pressures are balanced up to 20 Pa and the air flow remains unaffected up to 40 m³/h if required. The device thus meets the new requirements for wind pressure stability according to EN 13141-8 and is the first device of its type to achieve class S1.

The e²60 can be used in any e² environment as the same grilles, hoods, inner panels and controls can be used. Quick retrofitting is possible at any time.

Technical data

Operating Ranges (declared volumn flow*) 0-40 m3/h 0-60 m3/h
Efficiency Level* 88% 83%
Sensitivity to interference pressure** at 20 Pa Class S1
Class S2
Specific power consumption (SPI)**
(two devices + controller + power supply unit)
Class 0
0,09 W/(m3/h)
Class 0
0,10 W/(m3/h)
Sound power level** 36 dB(A) 42 dB(A)
Maxim power consumption 3,3 W
Supply voltage 12V DC
Borehole 162 mm
Minimum wall thickness 280 mm (lower on request)
Dimensions of the device 154 x 243 mm
Compatibility All 160 systems incl. LUNOtherm and outer hoods
Installation options New building and renovation

*according to EN 13141-8
** according to EN 13142