For the taping of overlaps and/or edge connections Easy to tear by hand Innovative moisture-resistant polypropylene medium Transparent, with printed positioning line Robust and elastic
For the taping of overlaps and/or edge connections on strips and panel-type construction materials, or for airtight masking of any type of feed-through, always on flat surfaces indoors.
- Easy to tear by hand
- Innovative moisture-resistant polypropylene medium
- Transparent, with printed positioning line
- Robust and elastic
|Roll Dimensions:||length: 40 m|
|width: 60 mm|
|thickness: 0.25 mm|
|Carton contents:||10 rolls = 400 m1|
|Pallet details:||42 cartons|
|Storage time:||2 years|
|Storage conditions:||cool and dry|
|Working temperature range:||above -5 °C|
|Temp. withstand range:||-20 to +80 °C|
■ Swiss patent no. 695 675
■ Swiss patent application no. 0069/04 dated 19 Jan. 2004
The surfaces to be bonded must be clean, dry and free of dust and grease.
If necessary, clean the surfaces to be bonded and / or the substrate. Tear the Ampacoll® INT to the desired length by hand. With the help of the printed line, position it so that it is centered on the joint or seam. Rubbing down the tape will improve bonding.
When bonding penetrations, such as rafters, outlet vents, beam heads etc., apply Ampacoll® INT in overlapped layers to the penetration and rub down. When sealing penetrations, do not prestretch Ampacoll® INT to ensure that any later movement by the structural elements can be absorbed.