Logo
Visit Partel.ieVisit Partel.co.ukVisit Partel.com
Sustainability Through Technology
Call us on: 0818 333355

Product Details

Compacfoam CF 200 - 980mm x 550mm x 25mm

Compacfoam CF200 can be used in a wide range of applications where structural support and the possibility of obtaining secure fixings into the material are required. It can often be used as a replacement for timber battens in these applications, where thermal bridging is to be reduced . It is ideally suited for support for door thresholds and window installation, where is is important to minimise thermal bridging.

More Details

Compacfoam is the new solution that combines the highest compressive strength with excellent thermal insulation and low dead weight. High stiffness (2% deformation under service load) and excellent long-term stability makes COMPACFOAM a solution to many problems in insulation and lightweight applications.

CF200 can be used in a wide range of applications where structural support and the possibility of obtaining secure fixings into the material are required.  It can often be used as a replacement for timber battens in these applications, where thermal bridging is to be reduced .  It is ideally suited for support for door thresholds and window installation, where is is important to minimise thermal bridging.

It is a strong lightweight rigid insulation made from thermoplastic foam, based on polystyrene a polymer with a density ranging from 100 to 400 kg/m3. Its physical and chemical structure corresponds to that of the more familiar expanded polystyrene (EPS). Tiny closed-cell foam balls of less than a millimetre in diameter are welded thermally into a compact block by their cell walls.

COMPACFOAM’s innovation was to dramatically improve the performance of this well established technology, allowing it to reach considerably higher densities. These results in unique material properties combined with the safety of a time-tested and proven material.

COMPACFOAM can be used in a wide range of applications where structural support and the possibility of obtaining secure fixings into the material are required.  It can often be used as a replacement for timber battens in these applications, where thermal bridging is to be reduced.  It is ideally suited for support for door thresholds and window installation, where it is important to minimise thermal bridging.
  • High compressive strength
  • Good screw pull-out resistance
  • Easy to drill & saw
  • Ductile
  • Diffusion open
  • Resistant to freezing
  • Excellent water absorption capacity – does not absorb more than 5-10% moisture
  • Applications around windows & door thresholds to reduce thermal bridging.
  • Thermal conductivity: 0.046 W/m.K
  • Unlimited long term stability
  • Product Downloads

Brochures & Guides

Datasheets

  • no files currently added